Back to search

University of British Columbia

Predicting axially and laterally loaded pile behaviour using in-situ testing methods

Abstract

dc:description

The prediction of axial and lateral pile behaviour is a complex engineering problem. Traditional methods of data collection and subsequent analyses are frequently in error when compared to full-scale, load tests. In-situ testing, using advanced electronic tools, provides a means by which representative field data may be obtained. This study investigates the use of such in-situ data in predicting axially loaded pile capacity and laterally loaded pile load-deflection behaviour. A total of twelve static axial pile capacity methods were evaluated to predict the results obtained from eight full-scale pile load tests on six different piles. These methods, separated into direct and indirect classes, used data obtained from the cone penetration test. Extensive use of commercially available microcomputer software significantly simplified the analyses. In addition, several dynamic pile capacity predictions are presented including results from in-situ dynamic measurements obtained with a pile driving analyzer during pile emplacement. An attempt has been made, with the use of tell-tales, to differentiate the shaft resistance and end-bearing components of the load test results. These results are then compared to the prediction methods investigated. Two methods of predicting lateral load-deflection behaviour using in-situ data have been investigated. One method uses pressuremeter test data and the other, a new method proposed in this study, uses full-displacement flat plate dilatometer test data. These predictions are compared with full-scale lateral load tests on three piles of differing size. In both the axial and lateral load cases, the preferred method(s) of analyses are identified. It is shown that excellent agreement can be obtained for predicting measured pile behaviour using several methods. The limitations of this study are noted, and recommendations for further research are proposed.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1987

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Davies, Michael Paul

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/26689

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Davies, Michael Paul. Predicting axially and laterally loaded pile behaviour using in-situ testing methods. master's thesis, University of British Columbia, 1987. http://hdl.handle.net/2429/26689