Back to search

University of British Columbia

Rheology of porous rhyolite

Abstract

dc:description

I describe an experimental apparatus used to perform deformation experiments relevant to volcanology. The apparatus supports low-load, high-temperature deformation experiments under dry and wet conditions on natural and synthetic samples. The experiments recover the transient rheology of complex (melt ± porosity ± solids) volcanic materials during uniaxial deformation. The key component to this apparatus is a steel cell designed for high-temperature deformation experiments under controlled water pressure. Experiments are run under constant displacement rates or constant loads; the range of accessible experimental conditions include: 25 - 1100 °C, load stresses 0 to 150 MPa, strain rates 10⁻⁶ to 10⁻² s⁻¹, and fluid pressures 0-150 MPa. I present a suite of high-temperature, uniaxial deformation experiments performed on 25 by 50 mm unjacketed cores of porous Φ∼0.8) sintered rhyolitic ash. The experiments were performed at, both, atmospheric (dry) and elevated water pressure conditions (wet). Dry experiments were conducted mainly at 900 °C, but also included a suite of lower temperature experiments at 850, 800 and 750 °C. Wet experiments were performed at ∼650 °C under water pressures of 1, 2.5, 3, and 5 MPa, and at a fixed PH2O of ∼2.5 MPa for temperatures of ∼385, 450, and 550 °C. During deformation, strain is manifest by shortening of the cores, reduction of porosity, flattening of ash particles, and radial bulging of the cores. The continuous reduction of porosity leads to a dynamic transient strain-dependent rheology and requires strain to be partitioned between a volume (porosity loss) and a shear (radial bulging) component. The effect of increasing porosity is to expand the window for viscous deformation for dry melts by delaying the onset of brittle deformation by ∼50 °C (875 °C to 825 °C). The effect is more pronounced in hydrous melts (∼0.67 — 0.78 wt. % H₂0) where the viscous to brittle transition is depressed by ∼140 to 150 °C. Increasing water pressure also delays the onset of strain hardening due to compaction-driven porosity reduction. These rheological data are pertinent to volcanic processes where high-temperature porous magmas I liquids are encountered (e.g., magma flow in conduits, welding of pyroclastic materials).

Degree

thesis:*
Name thesis:degree_name
Master of Science - MSc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Geological Sciences
Grantor dc:publisher
University of British Columbia
Year dc:date
2008

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Robert, Geneviève

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/2738

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Robert, Geneviève. Rheology of porous rhyolite. master's thesis, University of British Columbia, 2008. http://hdl.handle.net/2429/2738