Back to search

University of British Columbia

A hybrid phase-locked loop for clock and data recovery applications

Abstract

dc:description

Clock and data recovery (CDR) circuits are among critical building blocks of wireline receivers. In these receivers, typically after compensating for the adverse effects of the channel by an equalizer, the received signal is processed to the CDR block. The timing of the signal is first extracted (clock recovery), and then the actual data is recovered (data recovery). To recover the clock, phase-locked loops (PLLs) are usually used. The PLL output can track the phase and the frequency of its input. In this thesis, a hybrid PLL architecture is proposed. The PLL starts its operation using a binary phase/frequency detector (PFD) to achieve a fast lock and a wide tuning range. The operation is then automatically switched to a linear phase detector (PD) to achieve a low jitter clock signal upon lock, and finally the bandwidth is decreased to decrease the output jitter even more. Automatic switching of the operation from the binary to the linear PD is achieved by detecting the point at which the clock frequency crosses the data frequency. This PLL structure is particularly suitable for CDR applications, as its output is insensitive to continuous data streams. Also, a feedback-based technique is used in the charge pump (CP) to increase its swing. This is done by detecting the change in the drain-source voltages of the current source transistors of the CP and changing their gate-source voltages in a closed-loop feedback system to keep their currents constant. The PLL is designed and simulated in a 0.13 μm CMOS technology. Post-layout simulations show that the tuning range of the PLL is from ∼8.3 GHz to 9.6 GHz, and it consumes about 35 mW from a 1.2 V supply and has a deterministic jitter of about 35 fs. The total random jitter of the designed PLL is about 0.1 unit interval (UI) (11.7 ps with a clock frequency of 8.5 GHz). The worst-case lock time of the PLL is slightly less than 30 ns.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Electrical and Computer Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Jalali, Mohammad Sadegh

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/27486

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Jalali, Mohammad Sadegh. A hybrid phase-locked loop for clock and data recovery applications. master's thesis, University of British Columbia, 2010. http://hdl.handle.net/2429/27486