Back to search

University of British Columbia

A numerical and experimental study of flow and heat transfer from a flush inclined film cooling slot

Abstract

dc:description

Numerical and experimental results are presented for a simple, two dimensional flow from a flush, inclined slot in a flat plate. The geometry and mass flow conditions represent film cooling flows issuing from flush, inclined slots. The numerical velocity field predictions compare favourably with detailed flow measurements. Preliminary calculations of the heat transfer downstream of injection are also presented. Work done subsequent to this thesis indicates that the slot flow rate calibration may have been incorrect by 13 percent during the experiments. No correction for this possibility has been made here but a change, if made, would reduce the measured mass flow rates by 13 percent and would probably improve the agreement between measured and calculated velocity distributions. Experimental observations and measurements indicate that the velocity of the flow exiting the slot is non-uniform in both magnitude and direction. The variation of flow direction in the slot could not be measured in this study. Consequently, several assumed distributions are used to elucidate the effect of flow angle variation on film cooling performance. The flow field is shown to be essentially insensitive to the non-uniformities in magnitude and direction of the slot flow. However, the predictions of wall shear stress and wall heat transfer downstream of injection are significantly affected by the non-uniformities in the slot. Differences of 80 to 100 percent are predicted depending on the flow angle distribution. These effects are shown to be most significant within 40 slot widths of the slot. The results presented here may have important implications in prediction of the performance of various film cooling schemes. Furthermore, they point to a need for detailed flow measurements within and near modern film cooling orifices.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1988

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sinitsin, David M.

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/28064

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Sinitsin, David M.. A numerical and experimental study of flow and heat transfer from a flush inclined film cooling slot. master's thesis, University of British Columbia, 1988. http://hdl.handle.net/2429/28064