Back to search

University of British Columbia

A single phase Al₀ 3Ga₀ 7As/GaAs heterojunction resistive-gate charge-coupled device

Abstract

dc:description

The design, fabrication, and evaluation of a 128 pixel, single phase A10.3GavAs/GaAs heterojunction resistive-gate charge-coupled device (HRGCCD) is described. The HRGCCD has a higher operating speed and a larger charge handling capacity in comparison to the conventional buried channel, resistive-gate GaAs charge-coupled device (GaAs RGCCD). The higher operating speed of HRGCCDs is due to the higher electron mobility and velocity in an AlGaAs/GaAs heterojunction in contrast to a GaAs homojunction. In addition, the HRGCCDs can be integrated with high-speed on-chip high electron mobility transistors (HEMTs). The larger charge handling capacity of a HRGCCD is the direct result of the higher electron density in a HRGCCD in comparison to a GaAs RGCCD. A quantum mechanical model is used to calculate the carrier density in a triangular potential well formed at the interface between an undoped AlGaAs layer and an undoped GaAs layer. This model is coupled to a solution of Poisson's equation in bulk AlGaAs to determine the total carrier density in a HRGCCD for different layer and material specifications. This model is used to aid in the design of the HRGCCD. The fabrication of the HRGCCD required six mask levels employing 405 nm contact photolithography with a 1.0 µm design rule. Developments in the process technology previously employed at TRIUMF were required to create the HRGCCDs. These developments included a standard chlorobenzene-aided photoresist lift-off process to delineate r.f. magnetron sputtered Cr:SiO islands and a dry etch process to create interconnect vias. Two process runs of HRGCCDs, with differing layer parameters, were fabricated and evaluated at 4.33 MHz and at 50 MHz. The HRGCCDs tested at 50 MHz exhibited a charge transfer efficiency in excess of 0.99, and a dynamic range in excess of 50 dB with a linear response over a 40 dB input signal range.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Engineering Physics
Grantor dc:publisher
University of British Columbia
Year dc:date
1992

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wohlmuth, Walter Anthony

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/2962

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Wohlmuth, Walter Anthony. A single phase Al₀ 3Ga₀ 7As/GaAs heterojunction resistive-gate charge-coupled device. master's thesis, University of British Columbia, 1992. http://hdl.handle.net/2429/2962