Back to search

University of British Columbia

Experimental investigation of the tolerant wind tunnel for unsteady airfoil motion testing

Abstract

dc:description

Previously, the concept of the tolerant wind tunnel, developed in the Department of Mechanical Engineering, U. B. C., was tested only for stationary models. In the present study, the concept is investigated for unsteady airfoil motion. The new wind tunnel test section, using the opposite effects of solid and open boundaries, is a new approach to reduce wall blockage effects. Consisting of vertical airfoil slats uniformly spaced on both side walls in the test section, it is designed to produce a nearly free-air test environment for the test model, which leads to negligible or small corrections to the experimental results. The performance of this wind tunnel for unsteady model testing is examined experimentally with a two-dimensional NACA 0015 airfoil in a simple plunging sinusoidal motion. The airfoil is mounted vertically in the center plane of the test section between solid ceiling and floor. An oscillating table is designed to give the airfoil an accurate plunging sinusoidal motion. A full range of open area ratio is tested by varying the number of slats mounted inside the side walls. Pressure distribution along the airfoil surface and displacement of the airfoil are measured as functions of time by a data acquisition system designed for this research. Lift and moment are obtained by integration of the pressure distribution at every time increment. Using a numerical model based on the singularity distribution method, the free air case results for a NACA 0015 airfoil in the same unsteady motion are obtained. Comparison with the linear theory results by Sears¹ are discussed. Comparing with the numerical and the linear theory results, the experimental investigation shows that the new test section produces low-correction data.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1991

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kong, Lingzhe

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/29992

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Kong, Lingzhe. Experimental investigation of the tolerant wind tunnel for unsteady airfoil motion testing. master's thesis, University of British Columbia, 1991. http://hdl.handle.net/2429/29992