Back to search

University of British Columbia

Sedimentation between parallel plates

Abstract

dc:description

Settling basins can be shortened by using a stack of horizontal parallel plates which develop boundary layers in which sedimentation can occur. The purpose of this study is to examine the design parameters for such a system and to apply this approach to a fish rearing channel in which settling length is strictly limited. Flow between parallel rough and smooth plates has been modelled together with sediment concentration profile. Accurate description of boundary layer flow requires the solution of Navier-Stokes equations, and due to the complexity of the equations to be solved for turbulent flow some assumptions are made to relate the Reynolds stresses to turbulent kinetic energy and turbulent energy dissipation rate. The simplified equations are solved using a numerical method which uses the approach given by the TEACH code. The flow parameters obtained from the turbulent flow model are used to obtain the sediment concentration profile within the settling plates. Numerical solution of the sedimentation process is obtained by adopting the general transport equation. The lower plate is assumed to retain sediments reaching the bottom. The design of a sedimentation tank for a fish rearing unit with high velocity of flow has been investigated. The effectiveness of the sedimentation tank depends on the uniformity of flow attained at the inlet, and experiments were conducted to obtain the most suitable geometric system to achieve uniform flow distribution without affecting other performances of the fish rearing unit. The main difficulties to overcome were the heavy circulation present in the sedimentation tank and the clogging of the distributing system by suspended particles. Several distributing systems were investigated, the best is discussed in detail. It was concluded that a stack of horizontal parallel plates can be used in fish rearing systems where space is limited for settling sediments. Flow distribution along the vertical at the entrance to the plates determines the efficiency of the sediment settling process and a suitable geometrical configuration can be constructed to distribute the high velocity flow uniformly across the vertical. Numerical modelling of sediment removal ratio for flow between smooth and rough parallel plates has been calculated. The results show that almost the same pattern of sediment deposition occurs for both the smooth-smooth and rough-smooth plate arrangements.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1991

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Paulos, Yonas Kinfu

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/30055

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Paulos, Yonas Kinfu. Sedimentation between parallel plates. master's thesis, University of British Columbia, 1991. http://hdl.handle.net/2429/30055