Back to search

University of British Columbia

Heat exchanger fouling by precipitation of calcium phosphates

Abstract

dc:description

The fouling characteristics of artificially hardened waters containing calcium and orthophosphate ions were investigated. The water was circulated through a steam heated double pipe heat exchanger under turbulent flow conditions. Inlet water temperatures were about 20 to 25°C and the phosphate content about 100 ppm. Experiments were carried out to ascertain the effects of pH, velocity, surface temperature and concentrations of the calcium and the orthophosphate on the fouling process. The fouling behaviour was recorded in terms of the fouling resistance-time curve which was calculated from the time dependence of the overall heat transfer coefficients. Under the constant heat flux condition imposed, the fouling resistance was generally linear in time; however, asymptotic fouling was observed in some cases. The fouling rate was found to be a very strong function of the pH over the range 6.5 to 8.0. The rate was also found to be exponentially dependent on the calculated surface temperature. The initial fouling rate increased linearly with the velocity and with the concentrations of scale forming species. Deposit thickness increased with heated length of the stainless steel test section. In most cases, the deposit was a dense crystalline scale, which had a Ca/P molar ratio of 1.35±0.15. The results are discussed in terms of the ionic equilibrium involved and the solubility and crystallisation kinetics from the literature. It is apparent that the rate of phosphate precipitation is influenced both by surface reaction and mass transfer in the range of the variables studied. Findings are compared with the few prior phosphate fouling studies from the literature. Scale density is reported, and its thermal conductivity estimated using the fouling resistance measurements.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1992

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Singh, Atmajeet

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/3057

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Singh, Atmajeet. Heat exchanger fouling by precipitation of calcium phosphates. master's thesis, University of British Columbia, 1992. http://hdl.handle.net/2429/3057