Back to search

University of British Columbia

Supervisory voltage control scheme for grid-connected wind farms

Abstract

dc:description

Modern variable speed wind turbines utilize power electronic converters for the grid connection requirement and to improve performance. Most commonly used converters enable the wind turbines to maintain the required power factor (power factor control) or voltage (local voltage control) at the terminals. However, in many wind farm applications there is a need to control voltage at a specified remote location, which may require the installation of additional compensating devices (transformer tap changers, switched-capacitors, SVCs, etc.) to meet local power quality conditions. This thesis proposes a supervisory control scheme that uses the individual wind turbines to regulate voltage at the required location, i.e., point of common coupling. The proposed approach considers that each turbine may have somewhat different instantaneous wind speeds and real power outputs, and therefore different amounts of reactive power available for achieving the main control objectives. The operating limits of each turbine are also taken into account to ensure that all power electronic converters operate in the allowable region. Since the proposed supervisory scheme is general and can work with different controllers, we investigate several controllers in this thesis. The problem of control design is formulated as a linear matrix inequality. An innovative cost-guaranteed linear-quadratic-regulator-based controller with an observer is proposed and tuned for a range of operating conditions. In this thesis, we apply the proposed supervisory voltage control methodology to a candidate wind farm site on Vancouver Island, BC, Canada, made available through collaboration with Powertech Labs Inc. We have developed a detailed model of the system, using three 3.6 MW wind turbines, to carry out the simulation studies. The proposed control solution is compared with traditional approaches and shown to be very effective during load disturbances and faults. The proposed methodology is also flexible and readily applicable to larger wind farms of different configurations.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Electrical and Computer Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2006

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ko, Hee-Sang

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/31086

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Ko, Hee-Sang. Supervisory voltage control scheme for grid-connected wind farms. doctoral thesis, University of British Columbia, 2006. http://hdl.handle.net/2429/31086