Back to search

University of British Columbia

Stabilizer design for dynamic stability control of multimachine power systems

Abstract

dc:description

The development of new techniques for stabilizer design has been receiving considerable attention of power system industry. In this thesis, several new stabilizer design techniques are developed for the improvement of dynamic stability of multimachine power systems. Three kinds of dynamic stability problems are dealt with: the low—frequency oscillations, the stability of power systems with wide—range changing operating conditions and the multi—mode torsional oscillations of a two—machine system. Therefore, different stabilizer design techniques are developed. First, mathematical models are developed for dynamic studies and stabilizer design of multimachine power systems. Methods are also developed to select the number and the locations of stabilizers for the entire power system. A new pole-placement technique is developed for a decentralized Power System Stabilizer (PSS) design to control low—frequency oscillations. The computation is economic. The technique is applied to the stabilizer designs of a three—machine system and a nine— machine system. Simulation results show that PSSs thus designed are very effective to control low—frequency oscillations. A direct self—tuning regulator (STR) design method is developed for power systems with wide-range changing operating conditions. The indirect STR of Clarke based on the Generalized Predictive Control (GPC) method is improved so that the initial step control parameters are directly estimated and that the subsequent control parameters are recursively computed. The techniques developed are applied to the STR design of a nine—machine system. Comprehensive tests show that the STRs designed can effectively stabilize the power system with wide—range changing operating conditions while well— designed PSSs fail to do so. Finally, another pole—placement technique is developed for the excitation control of multi—mode torsional oscillations of a power system due to the subsynchronous resonance of a capacitor—compensated transmission line. This is a decentralized linear feedback design. The new technique is applied to the stabilizer design of the Second Benchmark Model of IEEE, System 2. Test results show that stabilizers designed can effectively control the torsional oscillations of the system over a wide—range of capacitor compensations.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Electrical and Computer Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1992

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Li, Qinghua

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/3289

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Li, Qinghua. Stabilizer design for dynamic stability control of multimachine power systems. doctoral thesis, University of British Columbia, 1992. http://hdl.handle.net/2429/3289