Back to search

University of British Columbia

Transformation elasticity in polycrystaline Cu-Zn-Sn alloy

Abstract

dc:description

A study has been made of the elasticity associated with the martensite transformation in the polycrystalline β-phase alloy of composition Cu-33.6 wt. % Zn-4 wt. % Sn tested at room temperature. The mechanical properties of the material undergoing the stress induced martensite transformation have been examined. These properties are influenced by the elastic anisotropy of the bcc β-phase, the development, preferential distribution and morphology and the mechanical properties of the transformation product. The elastic shape change associated with the elastically accommodated, stress-induced martensitic transformation was always found to be accompanied by some plastic deformation. A relationship between the β-grain size, the sample thickness and the deformation response was observed. Specimens with grains extending through the sample thickness exhibited large reversible strains (∼2.5%), whereas specimens with a much smaller grain size/thickness ratio (<1) exhibited only limited transformation elasticity. The morphology of the thermal martensite and the Ms temperature was also found to be influenced by the ratio grain size/thickness (g.s./t). A lower Ms temperature was associated with a decreasing g.s./t ratio; only self-accommodating burst martensite was observed in very fine grained material. The Af temperature increased with a decreasing g.s./t ratio. Repeated loading (cycling) reduced the hysteresis of the stress strain curve for all g.s./t ratios tested, but was always accompanied by plastic deformation of the matrix and the development of non-reversible deformation martensite. The experimentally determined habit plane for the thermal and the stress induced martensite were in moderate agreement with the planes predicted by the phenomenological martensite theory (W.L.R.) assuming a {110} <1Ī0> microscopic shear.

Degree

thesis:*
Name thesis:degree_name
Master of Science - MSc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Metals and Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1973

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dvorak, Ilja

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/33042

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Dvorak, Ilja. Transformation elasticity in polycrystaline Cu-Zn-Sn alloy. master's thesis, University of British Columbia, 1973. http://hdl.handle.net/2429/33042