Back to search

University of British Columbia

Thermal fouling studies : Computations on roughness effects, modifications of a test loop and tests...

Abstract

dc:description

The thermal fouling data of Watkinson were recomputed on the assumption that increases in pressure drop were caused entirely by roughness of the fouling deposit and not at all by blockage. The results indicate that roughness played some role in the sand-water runs, but no role in the gas oil runs. The anomalous increases in overall heat transfer coefficient with degree of fouling in the first two sand-water runs were thus explained by the effect of roughness on liquid film heat transfer coefficient. The original loop was modified, the principal change being the replacement of the manual temperature recording system by a digital Data Logging System. Fluid and wall temperatures, as well as differential pressure, could thus be automatically recorded as a function of time. Better control of independent operating variables such as fluid velocity, inlet temperature and heat flux could therefore be achieved, and the effects of temporary fluctuations in these operating conditions could be observed and separated from fouling effects. Thermal fouling runs were made in the modified heat transfer loop on samples of Bayer Process spent liquor from the ALCAN aluminum refinery in Arvida, P.Q. The only discernible trends in the results were increases in rate and degree of fouling with increasing heat flux to a maximum value, followed by a sharp decrease, at liquor velocities less than 5 ft/sec, and the absence of thermally detectable fouling at higher velocities. The unreproducibi1ity of the results is believed to be attributable, at least in part, to changes in chemical composition of the liquor throughout the experiments.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1971

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mayo Abad, Orestes

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/33557

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Mayo Abad, Orestes. Thermal fouling studies : Computations on roughness effects, modifications of a test loop and tests.... master's thesis, University of British Columbia, 1971. http://hdl.handle.net/2429/33557