Back to search

University of British Columbia

A study of the formation of vortices within a multiple pump sump

Abstract

dc:description

A literature survey was undertaken to collect information on multiple pump-sump design, the problems involved and solutions offered by various authors. This led to a study of the vortex forming mechanisms and a detailed examination of their significance to the design of a particular multiple pump-sump. An 'in-line' sump layout was selected because it was considered that such an arrangement may give the smallest sump volume, which often proves the cheapest. Though this layout is known to give rise to severe vortex formations, a better understanding of the vortex forming mechanisms might permit the development of a satisfactorily operating 'in-line' sump. Hot film anemometry techniques were used to monitor the turbulence levels within the sump and provide an index of the condition of the flow entering the bellmouth intakes. Considerable practical difficulties were experienced in making the anemometer probe function reliably. Because of the inherent inaccuracy of any unidirectional sensor within a fluid, the normal turbulence intensity parameter [formula omitted] was replaced by measurements of the main stream velocity fluctuations (dU), which offered a better representation of the comparative state of the flows within the sump. It was found that the introduction of various flow guides about the bellmouth intakes to physically suppress eddy shedding from the adjacent upstream pumps, significantly improved the sump performance. The tapering of the sump by varying the angle between the channel walls to reduce the deceleration of the flow along the channel, also added to the flow stability. It was concluded that the present study indicated the feasibility of constructing a workable 'in-line' sump configuration, and that further investigations encorporatlng direct pump efficiency tests in conjunction with turbulence measurements would be worth while.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1970

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Spurr, Kerrin J. W.

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/34623

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Spurr, Kerrin J. W.. A study of the formation of vortices within a multiple pump sump. master's thesis, University of British Columbia, 1970. http://hdl.handle.net/2429/34623