University of British Columbia
Optimal control and stabilization signals for a power system
Abstract
dc:descriptionPresent trends toward long distance extra high voltage transmission lines and static excitation can cause a reduction in the stability margins of a typical power system unless measures are taken to improve the system damping. Practical applications of stabilizing signals are investigated in this thesis and limitations of the design techniques discussed. An optimal control signal is derived from modern control theory. All signals are obtained from a common linearized power system and the performance is tested for large disturbance conditions on a single machine-infinite bus system where the machine, exciter and governor are represented in detail. Both types of signals are also tested on a practical four machine system model and it is shown that a similar improvement in damping can be obtained with either a stabilizing signal derived using conventional frequency response techniques or a proportional feedback controller obtained from solution of the algebraic matrix Riccati equation.
Degree
thesis:*- Name thesis:degree_name
- Master of Applied Science - MASc
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Electrical and Computer Engineering
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 1969
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Siggers, Christopher
Rights
dc:rights- Statement dc:rights
-
- For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/35305