Back to search

University of British Columbia

Theory and design of a wave generator for a short flume

Abstract

dc:description

This thesis describes the design of a proposed, new hydraulic laboratory, wave generator for use in a 39'-4¼'' long, 30" wide and 36" deep flume, and the re-design of a small wave generator previously built for a 21'-3 5/8" long, 8 3/4" wide and 10 5/8" deep flume. These relatively short flumes are installed in the Hydraulics Laboratory of the Department of Civil Engineering, University of British Columbia, and the installation of the proposed, new wave generator would augment the present limited wave research facilities. The project is supported by an operating grant from the National Research Council of Canada. The preparatory study of laboratory wave generators in use, presented herein, was made to determine how they function and their design problems. It was concluded that a rigid paddle, double articulation type would be best for generating deep-water, transition and shallow-water waves in a flume of relatively short length. Biesel's wave generator theory is outlined and was used in estimating wave heights and in determining power and strength requirements. The existing wave generator for the "small" flume is a rigid paddle, double articulation type. It did not function satisfactorily due to a very irregular paddle motion. The causes were isolated and a new drive system designed and installed, with good results. The resulting new operating specifications are: power = 1. Hp (D.C.) wave period range = 0.34 to 2.1 sees. design water depth = 6.5" estimated maximum wave height = 4" The proposed, new wave generator for the "large" flume is a rigid paddle, double articulation type designed around the adjustable paddle concept of G.D. Ransford (1949) as modified by Lt. CB. Coyer (1953). The designed operating characteristics are: power = 10-Hp (D.C.) wave period range = 0.68 to 4.28 secs. design water depth = 25" estimated maximum wave height = 14"

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1969

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Chappell, Eric Reginald

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/35359

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Chappell, Eric Reginald. Theory and design of a wave generator for a short flume. master's thesis, University of British Columbia, 1969. http://hdl.handle.net/2429/35359