Back to search

University of British Columbia

Attached growth nitrification using Ringlace media

Abstract

dc:description

This thesis reports on an attempt to grow nitrifying bacteria attached on the submerged growth media Ringlace® in the aerobic zone of a pilot scale Biological Enhanced Phosphorus Removal (BEPR) process treating municipal sewage. The Ringlace® media was a fibrous rope modified PVC material stretched over frames that were immersed into the process. Nitrification on the support media was meant to enhance overall process nitrifying capacity. The overall process operating parameters HRT, SRT, and DO were manipulated to investigate their effects on the nitrification rate of the bacteria attached to the support media. Growth on the media consisted of an array of higher life forms and bacteria. Worm infestation on the media appeared to increase with increased DO concentration. Cyclic anaerobic periods of 12 to 24 hours controlled worm infestations at operating DO levels of 3.5 mg/L and lower but proved to be unsuccessful at tested DO concentrations above that. Sludge settling in the test process improved over the control process during a run with 6 hour HRT, 4 day SRT, 5.5 mg/L DO level, and 18 °C temperature. During this run the control process average specific nitrification rate was 2 mg-N/gTSS-hr and the test process average rate was 0.5 mg-N/gTSS-hr. This run had the highest DO level of the experiment and the Ringlace® support media had the highest amount of worms observed on it for the entire experiment. It is believed that the significant reduction in nitrification rate and the improved sludge settling were a result of interference from the worms. The results of batch testing Ringlace® frames removed from the flow through system throughout the experiment showed the biomass attached to the Ringlace® support media never exhibited specific ammonia uptake rate significantly greater than zero at the 5 % significance level. The suspended growth portion did display specific ammonia uptake rates which were approximately the same as rates reported in the literature for similar suspended growth studies. In selected batch tests the biomass on the media was shown to take up soluble carbon indicated by BOD5 measurements.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1995

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Setter, Kevin J.

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/3597

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Setter, Kevin J.. Attached growth nitrification using Ringlace media. master's thesis, University of British Columbia, 1995. http://hdl.handle.net/2429/3597