University of British Columbia
An experimental investigation of the autorotation of a flat plate
Abstract
dc:descriptionAutorotation measurements were made for a 4 inch chord thin plate under approximately two-dimensional flow conditions in a low speed wind tunnel. To determine the instantaneous angular velocity and angular acceleration of the plate, a new technique based on the principle of an angular displacement transducer was developed. The closely linear variation of tip speeds with wind speed and the non-linear characteristics of the build-up time and angular acceleration were investigated in the wind speed range from 10.9 fps to 37. 3 fps. To examine the instantaneous aerodynamic loading on the autorotating plate as a function of angular position of the plate, surface fluctuating pressure measurements were made, with the aid of a pressure transducer and a dynamic pressure seal, and correlated with displacement transducer readings at the wind speed of 26. 3 fps. Instantaneous aerodynamic torque during one autorotation cycle was estimated from the integration of the fluid moments resulting from the instantaneous surface pressure fluctuations. Some discussion of the aerodynamic phenomena is given.
Degree
thesis:*- Name thesis:degree_name
- Master of Applied Science - MASc
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Mechanical Engineering
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 1966
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Cheng, Shi
Rights
dc:rights- Statement dc:rights
-
- For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/36206