Back to search

University of British Columbia

Pressure leaching of copper sulphides in perchloric acid solutions

Abstract

dc:description

The leaching of covellite (CuS), chalcocite (Cu₂S), chalcopyrite (CuFeS₂) and bornite (Cu₅FeS₄) was carried out in a shaking autoclave in perchloric acid solutions and using moderate pressures of oxygen. The temperature range of investigation was 105-140°C. It was found that covellite, chalcocite and bornite leach at approximately similar rates, with chalcopyrite being an order of magnitude slower. It was found that chalcocite leaching can be divided into two stages, first, the rapid transformation to covellite with an activation energy 1.8 Kcal/mole, followed by a slower oxidation stage identified as covellite-dissolution with an activation energy of 11.4 Kcal/ mole. These two stages of leaching were also observed in bornite with chalcocite (or digenite) appearing as an intermediate step. No such, transformations were observed in covellite or chalcopyrite. Two separate reactions were recognized as occuring simultaneously for all four minerals during the oxidation process: an electrochemical reaction yielding elemental sulphur and creating pits on the mineral surface, and a chemical reaction producing sulphate. The first reaction dominates in strongly acidic conditions, being responsible for about. 85% of the sulphur released from the mineral, but the sulphate to elemental sulphur ratio in solution increases with decreasing acidity. Above 120°C the general oxidation process is inhibited by molten sulphur coating the mineral particles; the sulphate producing reaction, however, is not reduced above this temperature. For chalcopyrite the activation energies for the sulphate producing reaction and mineral solubilized were found to be 16.0 Kcal/mole and 11.0 Kcal/mole, respectively. It is suggested that chalcopyrite may leach partially via the .formation of transient covellite on the surface but since its leaching rate is faster than that for chalcopyrite, no covellite is detected after leaching.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Metals and Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1967

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Loewen, Fred

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/36305

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Loewen, Fred. Pressure leaching of copper sulphides in perchloric acid solutions. master's thesis, University of British Columbia, 1967. http://hdl.handle.net/2429/36305