Back to search

University of British Columbia

Modelling and control of feed drives

Abstract

dc:description

Feed drives are used in positioning of machine tools. The drives are actuated either by linear or rotary servo motors. The ball screw drives are driven by rotary motors; hence they have flexibility and added friction due to nut interface. Direct drives are driven by linear motors which have more mechanical stiffness, but less disturbance rejection due to missing load reduction mechanism. This thesis presents the modelling and control of drives with rigid and flexible structures. A single degree of freedom flexible oscillator is mounted on a high speed, rigid feed drive table for experimental illustration of system identification and the active control method proposed in the thesis. The rigid feed drive dynamics include the mechanical component of the rigid body mass and viscous damping, and the electrical component of the power amplifier and motor. The flexible component is modelled by springs, mass and damping elements. Both rigid and flexible dynamics of the system are identified experimentally through unbiased least square, sine sweep and impact model tests. The vibration of the single degree of freedom system is actively damped by an acceleration feedback inserted in the velocity loop. A Kalman filter is used to minimize the drift and noise on the acceleration measurements. The position loop is closed with a proportional controller. It is experimentally demonstrated that the vibrations of the flexible structure can be well damped. However, the acceleration feedback used at the resonance frequency greatly minimizes the bandwidth close to the vibration frequency. Further methods need to be used to expand the bandwidth beyond the natural frequency of the flexible structure by coping with the anti-resonant effect of the acceleration feedback.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ng, Kenneth

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/36802

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Ng, Kenneth. Modelling and control of feed drives. master's thesis, University of British Columbia, 2011. http://hdl.handle.net/2429/36802