Back to search

University of British Columbia

Structure and deformation characteristics of beta'AuZn

Abstract

dc:description

The deformation behaviour of the intermetallic CsCl-structure compound β'AuZn has been investigated over a wide range of metallurgical variables. The plastic deformation, specifically the stress-strain relation, has been characterized in terms of the effects of composition, temperature, strain-rate, and grain size. The constitutional defect structure was investigated using lattice parameter measurements and annealing experiments. Polycrystalline AuZn was found to behave in a ductile manner, over the temperature range 77 to 533°K and composition range 48.0 to 52.0 a/o Au. In addition to slip on the planes of the <001> zone, slip on planes of the <111> zone was also suggested by the slip trace analyses. This may account for the observed ductility and high work hardening rate. The composition dependence of the yield stress exhibited the following behaviour; 1) a minimum at the stoichiometric composition, 2) a linear dependence of hardening on the deviation from stoichiometry, 3) approximately equal hardening due to both excess Au and Zn atoms, and 4) a temperature independent hardening-composition slope (except at 77°K where a hardening minimum was observed at 50.5 a/o Au). The existing order strengthening theories and solid solution hardening mechanisms were found to be unsatisfactory for AuZn. The temperature dependence of the yield stress was similar to that observed for bcc metals and alloys with a rapid increase in yield stress at temperatures below 200°K. The excess Au atoms decreased the temperature dependence significantly in the composition range 50.1 to 51.6 a/o Au The temperature dependence of the yield stress was investigated using the thermally activated flow parameter analyses. The magnitude of the activation volume, activation energy, frequency factor and shear stress extrapolated to 0°K were consistent with the predictions of either the thermally activated cross-slip mechanism developed by Escaig or the Peierls-Nabarro force mechanism proposed by Rajnak and Dorn. The Peierls mechanism was found to provide a more satisfactory explanation of the solid solution softening phenomena. The defect structure of AuZn was determined to be antistructural. The larger Au atom expanded the lattice more than the smaller Zn atom constricted it. The as-extruded Zn-rich wire exhibited an anomalous increase in resistivity during annealing experiments. The increase and subsequent decrease were attributed to a variation in the degree of long-range order.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Metals and Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1967

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Causey, Allan Robert

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/36979

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Causey, Allan Robert. Structure and deformation characteristics of beta'AuZn. doctoral thesis, University of British Columbia, 1967. http://hdl.handle.net/2429/36979