University of British Columbia
Characteristics of a reflection-type microwave modulator utilizing a reflex klystron operated in the passive region
Abstract
dc:descriptionExperiments were carried out to determine the characteristics of a reflection-type modulator. The modulator consisted of an E-plane T-junction that was terminated on the side-arm by a reflex klystron operating in the passive region. Switching was accomplished by applying a pulse to the repeller of the passive klystron. It was found that the switching characteristics were strongly dependent on the power level at the input to the modulator. Good switching characteristics were obtained at low power levels hut these deteriorated as the input power became comparable to that produced by the klystron when operating as an oscillator. For the particular klystron used, satisfactory switching was possible for input power levels approximately 5 to 10 dB less than the output of the switching klystron. It was also found that the modulator characteristics depended on the operating mode of the passive klystron. The desired operating mode was a compromise between power-handling capability and the switching rate. An attempt was made to explain the decrease in switching range at high input power levels by relating the observed results to an increase in the bunching parameter at the boundaries of the passive region. However, this did not fully account for the observed results.
Degree
thesis:*- Name thesis:degree_name
- Master of Applied Science - MASc
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Electrical and Computer Engineering
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 1966
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Domeier, Gordon Charles
Rights
dc:rights- Statement dc:rights
-
- For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/37720