Back to search

University of British Columbia

Hole-drilling residual stress measurement in an intermediate thickness specimen

Abstract

dc:description

The hole-drilling method for measuring residual stresses is generally applied to two extreme cases. In the “thick” case, the specimen depth is very large compared with the hole depth. The far boundary is then sufficiently distant that its effect can be neglected. In the “thin” case, the specimen has the form of a thin plate through which the hole penetrates fully. The thin plate creates plane-stress conditions and it is usually assumed that the associated residual stresses are uniform through the plate thickness. This research focuses on the intermediate case where the specimen has a thickness modestly greater than the hole depth. The far boundary is then near enough to give significant influence, and the through-thickness residual stresses are non-uniform. The finite specimen thickness and non-uniform residual stresses create significant bending deformations of the specimen during hole-drilling that are not present in either extreme case. This bending effect creates out-of-plane deformations that can provide an opportunity for a novel measurement approach. The “intermediate” case is investigated using an analytical model and by finite element analysis. Experimental measurements are made using Electronic Speckle Pattern Interferometry (ESPI), and a comparison is made of the theoretical and experimental results.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Abraham, Colin

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/37744

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Abraham, Colin. Hole-drilling residual stress measurement in an intermediate thickness specimen. master's thesis, University of British Columbia, 2011. http://hdl.handle.net/2429/37744