Back to search

University of British Columbia

Application of electrospun carbon nanofibres for batteries and supercapacitors

Abstract

dc:description

With the great demand for energy storage devices with much higher energy density, better power performance and longer cycle life, researchers are looking into nano-structured battery and supercapacitor electrodes due to the higher accessibility of ions to electrodes, improved specific capacitance, and reduced chance of mechanical degradation compared to bulk materials. In this study, a composite system of conductive carbon nanofibres with active materials (polypyrrole and silicon nanoparticles) are fabricated for supercapacitor and lithium ion battery electrode applications. The aim is to use carbon as a strong mechanical and electrical support and the high energy storage capability of active materials to develop new generation electrode systems. Carbon nanofibres with 3.9±0.5×10² nm in diameter are fabricated from a copolymer precursor, poly(acrylonitrile-co-acrylamide), through electrospinning and carbonization. The mild exothermic heat reaction of this copolymer and the enhanced heat flow into nano-scaled fibres during stabilization permits fabrication of high quality and large-scale carbon nanofibre mats with reasonable conductivity (18±1 S/cm), high porosity, and high accessible surface area. Carbon nanofibres are subsequently deposited on electrochemically with polypyrrole for 4 and 8 hours for use as a supercapacitor electrode. Capacity is compared with that of a bulk polypyrrole film. Both systems possess a gravimetric capacity of ca. 150 F/g, but an enhanced volumetric capacity in the nanofibrous electrode (9±1×10⁷ F/m³ for nanofibres vs. 6.0±0.5×10⁷ F/m³ for film) at greater amount of polypyrole deposition (8 hour deposition) is observed. The porous nanofibrous system also reduces the ionic resistance from that of the pure polypyrrole film, which is at least 1.9±0.8×10²Ω, to just 2 – 3 Ω at the highly reduced state. In lithium ion battery applications, a core-shell electrospinning method is used to fabricate carbon nanofibres containing silicon nanoparticles in the core. The core-shell structural advantage over non-core-shell structure observed to be in the prevention of silicon particle fusion and reduced breakage after interacting with lithium ions. At 30 wt% nanoparticle loading, both systems can reach over 1000 mAh/g initial capacity at 100 – 600 mA/g cycle rates. After 20 cycles, the capacity retention of Si in most core-shell systems are significantly higher than that of the non-core-shell system by ca. 10 – 20 %. Further optimization is required to improve the cycle life and electrode stability.

Degree

thesis:*
Name thesis:degree_name
Master of Science - MSc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Lee, Nicole Ying-Ju

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/38161

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Lee, Nicole Ying-Ju. Application of electrospun carbon nanofibres for batteries and supercapacitors. master's thesis, University of British Columbia, 2011. http://hdl.handle.net/2429/38161