Back to search

University of British Columbia

Effects of cold wall quenching on unburned hydrocarbon emissions from a natural gas HPDI engine

Abstract

dc:description

The quenching of hydrocarbon flames on cold surfaces is considered to be a potential source of unburned hydrocarbon (UHC) emissions from internal combustion engines, but its contribution to emissions has been difficult to determine due to the strong coupling between physics, chemistry and flame/wall geometry. This is particularly problematic for high pressure direct injection (HPDI) engines where high pressures, inhomogeneous mixtures and complex piston geometry are present. In this work, a computational model is implemented to determine the distance at which hydrocarbon flames quench on cold walls during numerical simulation. This model accounts for variable pressure, temperature, gas mixture and the geometry conditions. The model presented in this work is an extension of the experimental work done by Boust et. al. with stoichiometric premixed flames at low pressures. The validation of this model for high pressure and diffusion flames is presented and shows that the correct trends in heat flux and order of magnitude of quench distance are observed. This model is further refined for engine simulation and enhanced by a two-zone mass diffusion model to account for post-quench oxidation of boundary fuel. A selection of engine cases are simulated for a variety of different conditions to determine the spatial distribution and temporal evolution of unburned fuel cold surfaces. It was found that wall quenching on the piston contributes up to 50% of the total UHC during the combustion cycle, the majority of which is oxidized during the expansion stroke; the final contribution is at most 10% but frequently near or less than 1%. As the injection pressure was increased, quenching on the piston surface became more extensive, through the quenching thickness itself decreased. UHC from wall quenching occurs more readily for higher load conditions due to the richer mixtures and incomplete mixing. Altered engine timing introduced coupled effects of changed flame/wall interaction and combustion characteristics. The data obtained from the model can be used to evaluate attempts to reduce UHC by changing combustion chamber geometry.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Turcios, Marco Antonio

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/38308

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Turcios, Marco Antonio. Effects of cold wall quenching on unburned hydrocarbon emissions from a natural gas HPDI engine. master's thesis, University of British Columbia, 2011. http://hdl.handle.net/2429/38308