Back to search

University of British Columbia

Plastic behaviour and buckling of rolled structural steel members under compression and bending

Abstract

dc:description

This research into the properties of a 5"x5"x16lb W.F., A 36 Steel, rolled structural member was undertaken to determine the following: i - Yield stress distribution over the cross section of the member as determined by coupon tests. ii - Development of strain over the cross section of the member, as measured by electric strain gauges, when subjected to a) Axial loading, b) Bending Moment. iii - The effect of previous loading of a member as a column into the region of yielding on its subsequent behaviour as a beam loaded to failure. The following results were obtained: i - Yield stress, particularly the upper yield stress was not uniform over the cross section. ii - The strain distribution in the plastic range was not uniform and varied from cross section to cross section and even at closely adjacent points on the same cross section. iii - Failure of the member, due to inadequate lateral support when loaded as a column, occurred before complete yielding was achieved. The effect of this previous loading on the subsequent behaviour of the member as a beam loaded to failure was inconclusive.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1963

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Irvine, Edward Charles Fordyce

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/39060

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Irvine, Edward Charles Fordyce. Plastic behaviour and buckling of rolled structural steel members under compression and bending. master's thesis, University of British Columbia, 1963. http://hdl.handle.net/2429/39060