Back to search

University of British Columbia

Optimum response contactor servomechanism

Abstract

dc:description

This thesis deals with the design of simple circuits to realize the optimum second order contactor type servo. The analysis is based on the generation of a switching function so that torque reversal will occur at the point where the generated function g(t) intersects the error function e(t). The conventional treatment differs from the above method in that the required switching boundary relationship, f(ė), between e and e^° is obtained so that voltage proportional to e-f(e^°) is used as the switching signal. Using a d-c shunt motor or an induction motor, analysis and design of optimum systems based on the generated function treatment had been carried out taking into account the actual motor characteristics and relay time delay. An optimum relay servo for a 1/50 h.p. Ford induction motor was constructed on this principle and tested. The simplicity of the circuits involved makes this design highly practical. The optimization of a second order contactor servo can also be accomplished by approximating the optimum switching boundary with a simple lead network. A servo system using the same 1/50 h.p. induction motor was built according to this method. This approach results in a simpler circuit than the former; however, it has a larger dead zone and is only applicable with an a-c servo motor. A brief discussion of the possiblity of employing the generated function technique to the analysis of a 3rd order system was also made.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Electrical and Computer Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1961

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Butt, Chak Ying

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/39613

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Butt, Chak Ying. Optimum response contactor servomechanism. master's thesis, University of British Columbia, 1961. http://hdl.handle.net/2429/39613