Abstract
dc:descriptionThe effects of a polycrystalline surface layer on the critical resolved shear stress, yield stress and the work hardening rate of tin single crystals has been investigated. The change in these parameters was found to be independent of the thickness of the layer. The results have been interpreted in terms of the inhibition of surface sources and the higher stress level required to initiate interior sources. An exploratory investigation of the flow mechanism in tin was undertaken. Tin single crystals oriented for slip on the (110) [001] slip system were deformed in the temperature range from room temperature to -80°C, with the lower limit of temperature being sensitively dependent on the strain-rate. Twinning was observed to be the mode of deformation below this lower limit. Strain-rate change tests at temperatures from -27°C to R.T. were performed in order to assess the activation energy and activation volume. On the basis of these values, the flow mechanism was postulated to be the non-conservative motion of jogs in screw dislocations.
Degree
thesis:*- Name thesis:degree_name
- Master of Applied Science - MASc
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Metals and Materials Engineering
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 1963
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Causey, Allan Robert
Rights
dc:rights- Statement dc:rights
-
- For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/39700