Back to search

University of British Columbia

An investigation of deformations in stainless steel rings by heating

Abstract

dc:description

Screen cylinders are widely used in the field of pulp and paper for the removal of oversized contaminants. These screens may consist of several cylindrical partitions that are attached to each other by welding them to cylindrical rings. Since they are subject to various types of loading and placed in a corrosive environment, it is desirable to understand the changes that occur in them as a result of heating in a welding process. The focus of this study is to identify the cause and magnitude of deformations due to welding in the connecting rings of stainless steel AISI 304L. This is accomplished by investigating two potential mechanisms: 1) Microstructural changes such as phase transformations, and 2) Plastic deformation. To consider microstructural changes, a ferritescope is utilized for detecting the non-austenitic phases that may occur. Measurements taken from connecting rings prior to and after welding show that little phase transformation is caused in AISI 304L. In a second set of experiments, cylindrical specimens of AISI 304L are heated to elevated temperatures and compressed in the Gleeble 3500 machine. It is confirmed that heating and straining produce insignificant phase transformations in the rings. Material data is also obtained for elevated temperature stress strain curves at low strain rates that were not available. These results are used in a thermostructural analysis of the rings for plastic deformation. A simplified constrained beam model is used to illustrate the possibility of compressive yielding in the heated region of the material. This analysis highlighted important aspects of the thermo-structural analysis including buckling/bending and the temperature profile. Experiments on square plates of AISI 304L confirmed some of these predictions. A finite element model created using LS-DYNA and C++ code predicted the deformations in square plate samples with reasonable accuracy. A simpler finite element methodology is then used as an extension of this work to examine plastic deformation in the AISI 304L rings after welding. About 440 simulations with varying parameters are performed with the results indicating that significant plastic deformation occurs during the welding procedure and suggestions are given for controlling this deformation.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Towfighi, Siyavash

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/39931

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Towfighi, Siyavash. An investigation of deformations in stainless steel rings by heating. master's thesis, University of British Columbia, 2011. http://hdl.handle.net/2429/39931