University of British Columbia
Some properties of aluminum oxide in electrolytic solutions
Abstract
dc:descriptionBy anodic oxidation, an aluminum plate can be covered with an amorphous or crystalline oxide layer, depending on the electrolyte used. The amorphous layer, obtained in a solution of oxalic or sulphuric acid, has a porous structure. However, the pores do not go right down to the aluminum as has been shown by many investigators, but end in a solic insulating layer, the thickness of which may be determined by capacity measurements. Corresponding to a given temperature and solic concentration of the electrolytic solution and a given formation current density, there is only one final capacity obtainable. Increasing the concentration, or temperature, or decreasing the current density, increases the final capacity obtainable.
Degree
thesis:*- Name thesis:degree_name
- Master of Arts - MA
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Physics
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 1949
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Urquhart, Helen Mary Ann
Rights
dc:rights- Statement dc:rights
-
- For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/41882