Back to search

University of British Columbia

Experimental dynamic verification of open piled wharf models

Abstract

dc:description

Designers of wharf structures have historically had little guidance from published standards from which to base their seismic designs. Many of the methods used to develop models for seismic analysis are taken from building or bridge codes, but fundamental differences between the support systems in buildings/bridges and wharves may make these codes unsuitable for analysing wharf structures. Little research has been done to verify the applicability of building and bridge code recommendations for the seismic analysis of open-piled wharves. The aim of this study was to assess the relative importance of different modelling assumptions, taken from guidelines set out by building and bridge codes, to determine the inputs for the dynamic modelling of wharves. In this study, two wharves, a vertical piled wharf and a batter piled wharf, were analysed to determine their dynamic characteristics. The vertical piled wharf was monitored by means of an ambient vibration survey. The ambient vibration measurements provided data from which to calculate the low level vibration characteristics of the wharf. The dynamic characteristics determined from the data were used to calibrate a computer model that was, in turn, used to conduct a parametric study of the major variables used to model wharf structures. The variables that were studied were as follows: non-structural restraints; length to fixity of the piles; structure mass; and stiffness of the framing members. It was found that the first two parameters can make a large difference in the dynamic properties of the structure, while the influence of the last two parameters is relatively insignificant. The batter piled wharf was subjected to strong motion shaking during the 1989 Loma Prieta earthquake. Because of the limited availability of strong motion data for wharves, the data recorded during the earthquake provided a unique opportunity to determine the behaviour of the wharf under strong shaking as well as to evaluate its dynamic characteristics. Analysis showed that the individual sections of the wharf moved independently of one another during the earthquake, although these motions were highly influenced by the ground movements in the free field. Frequency and time domain analyses resulted in the determination of one transverse natural frequency at approximately 3.0 Hz for one of the independent sections of the structure.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1996

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Yee, Steven W. G.

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/4225

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Yee, Steven W. G.. Experimental dynamic verification of open piled wharf models. master's thesis, University of British Columbia, 1996. http://hdl.handle.net/2429/4225