Back to search

University of British Columbia

Quantitative assessment of the effect of copper chills on casting/chill interface behavior and the microstructure of sand cast A319 alloy

Abstract

dc:description

Although the demand for A319 alloy has increased in recent years, thermal fatigue resistance of the alloy is still one of the most important challenges in engine applications, especially in the newer generation of engines in which cylinder spacing has been reduced. According to the previous studies there are several parameters that improve thermal fatigue resistance such as: low SDAS, fine grain size, low porosity level, and low intermetallic content. Cooling rate has a direct effect on the shape, size, and distribution of the microstructural phases, as well as on the scale of the dendrites, and pore size. High cooling rates can improve thermal fatigue resistance, as a result of fine microstructure and small pore size. On the other hand, thin sections of a mold may not properly fill and “Cold Shuts” may result, if high cooling rates are applied. One approach to balance these phenomena is to use a water-cooled chill where water cooling is activated part way through the casting sequence. This type of chill causes a lower cooling rate initially, when the filling procedure is occurring, and after filling, the cooling rate increases to reduce the microstructure size. The results show that this method has the potential to both avoid cold shuts and miss-runs and improve the cast microstructure farther into castings remote from the chill. A mathematical model has been developed in “ANSYS CFX 12.0” to evaluate the effectiveness of this concept quantitatively. The model simulates the behavior of the Casting/chill interface and also predicts the cooling rates resulting from different casting conditions when using solid chill and water-cooled chill.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2012

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Farhang Mehr, Farzaneh

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/43592

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Farhang Mehr, Farzaneh. Quantitative assessment of the effect of copper chills on casting/chill interface behavior and the microstructure of sand cast A319 alloy. master's thesis, University of British Columbia, 2012. http://hdl.handle.net/2429/43592