Back to search

University of British Columbia

Seismic response of cantilever shear wall buildings

Abstract

dc:description

Nonlinear time history analysis was carried out in order to estimate the demands on cantilever shear wall buildings due to the design level earthquakes. A hysteretic bending moment - curvature relationship was developed and implemented into computer program OpenSees. The study included 15 different shear wall buildings that ranged in height from 10 to 50 stories with a range of elastic bending moment demand at the base as a ratio of bending moment capacity from 1.3 to 3.7. The influence of ground motion selection and scaling on different structural response quantities was studied. The input ground motions were scaled to uniform hazard spectrum (UHS) and conditional mean spectrum (CMS). It was observed that a fewer number of spectrum matched ground motions can be used to establish the mean response, while a reasonable similarity was found between the mean demand parameters from spectrum matched and the envelope of CMS ground motions. Mean roof displacements from nonlinear time history analysis were used to determine appropriate effective stiffness values to be used in response spectrum analysis to accurately predict the maximum roof displacement. It was observed that stiffness reduction factor reduced from 1.0 to about 0.5 as the ratio of elastic bending moment demand at the base to the wall flexural capacity increased from 1.3 to 3.7. In addition, models were proposed for the complete envelopes of curvature demand and interstory drift demand over the wall height, including an accurate estimate of the maximum curvature demand at the wall base, midheight curvature demand, and maximum interstory drift at the roof. The developed models for base curvature and roof interstory drift demands were expressed in term of roof displacement demand. The midheight curvature demand was found to be less than the recommended values for yield curvature. Lastly, the results of nonlinear time history analysis were used to determine an expression for estimating base shear force demands. The shear amplification factor, defined as the ratio that the design base shear force needs to be increased, was found to be independent of the building height and to have a maximum value of 2.0.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2012

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dezhdar, Ehsan

Rights

dc:rights
Statement dc:rights
  • Attribution 3.0 Unported
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/43678

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Dezhdar, Ehsan. Seismic response of cantilever shear wall buildings. doctoral thesis, University of British Columbia, 2012. http://hdl.handle.net/2429/43678