Back to search

University of British Columbia

Effect of chemical additives on Z-direction filler distribution in paper

Abstract

dc:description

It is well known that paper properties such as opacity, printing quality, brightness, and roughness are affected by the z-direction mineral filler distribution. In this study, the effect of four different parameters (filler, starch, chemical retention aids and the machine parameter (vacuum)), on the z-direction filler distribution in paper samples was investigated. Paper samples were made using an apparatus that simulates a suction box. Different levels of filler (PCC), chemical additives and vacuum were chosen based on a central composite design. The effect of these parameters on filler distribution in cross-section of paper samples was investigated by using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray analysis (EDX) which is a non-destructive technique. The area covering the thickness of the paper was divided into five layers and each layer was subjected to EDX analysis to obtain the calcium content through the paper thickness. The results indicated that the filler distribution in the z-direction of paper samples increased from the top side to the wire side. The calcium content in the layer near the wire side was significantly higher than in the other layers. The other layers had similar calcium content. The chemical additives as well as vacuum in suction box had a significant effect on the filler distribution. Increasing the filler and starch led to higher level of filler content in all layers through the sheet thickness. Increasing the vacuum and retention aids led to higher level of filler content in layers near the wire side. The effect of high charge density starch used in our study was significantly higher than the effect of retention aids in retaining the filler through the thickness of the paper. Based on the obtained data, a set of empirical models were constructed that can predict the filler distribution through the thickness of the paper. We validated our results by measuring the calcium content through applying image processing technique on the SEM cross-section images and measuring the ash content of paper samples. The results of both of these approaches confirmed the EDX measurements.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2013

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Motiee, Sima

Rights

dc:rights
Statement dc:rights
  • Attribution 3.0 Unported
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/44198

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Motiee, Sima. Effect of chemical additives on Z-direction filler distribution in paper. master's thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/44198