Back to search

University of British Columbia

Synthesis and solubility of arsenic tri-sulfide and sodium arsenic oxy-sulfide complexes in alkaline sulfide solutions

Abstract

dc:description

Alkaline sulfide leaching (ASL) at approximately 100 ºC has been used to selectively extract arsenic and antimony from enargite and tetrahedrite concentrates. Sodium thio-arsenate has been postulated to crystallize from alkaline sulfide leaching solutions upon cooling. However, literature data on the solubility of sodium thio-arsenate as well as proof of its crystallization from ASL solutions is scant. In this thesis, the solubility of leach-produced and synthetic sodium thio-arsenate is studied. To determine arsenic solubility in ASL solutions, sodium thio-arsenate and sodium arsenic oxide sulfide complexes are synthesized by various means and characterized by EDX, QXRD, and ICP. The synthesis of amorphous As₂S₃, sodium arsenic oxy-sulfide complexes, and sodium thio-arsenate is first presented. For amorphous As₂S₃ synthesis, the effect of concentration of sodium sulfide (0.1 M) and hydrochloric acid (1 M), temperature (40 ~ 60 ºC), and aging time (48 hours) was optimized. The solubility of synthetic sodium arsenic oxy-sulfide complexes and sodium thio-arsenate in ASL solutions increases significantly as temperature is increased to 95 ºC. More importantly, the solubility of sodium thio-arsenate at certain temperatures is significantly affected by the concentration of sodium hydroxide and sulfide in solution. Due to the common ion effect, if NaOH and HS- concentrations are very high, the solubility of sodium thio-arsenate decreases. Enargite leaching tests were done to characterize the precipitate that occurred upon cooling and to verify the arsenic saturation point, which should be between 38.5 ~ 58 g/L (0.51 M ~ 0.78 M) As depending on the NaOH and HS- concentration. Comparison with solubility experiments of pure sodium thio-arsenate shows that arsenic solubility in ASL solutions is supersaturated. However, direct comparison of saturation in ASL solutions and the solubility as obtained by the synthetic solutions/crystallites prepared here is not possible given the complex nature of the ASL crystallites that appear not to contain the often discussed “sodium thio-arsenate”.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2013

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Li, Wen

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/44546

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Li, Wen. Synthesis and solubility of arsenic tri-sulfide and sodium arsenic oxy-sulfide complexes in alkaline sulfide solutions. master's thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/44546