Back to search

University of British Columbia

Electro-hydrodynamics of gas-solid fluidized beds

Abstract

dc:description

The generation of electrical charges, reported in gas-solid fluidized beds for over sixty years, can cause serious problems like wall sheeting in polyolefin reactors, leading to costly shutdown, electrical shock hazards and even explosions. Understanding the associated phenomena plays an important role to avoid these problems. In this study an attempt has been made to broaden the understanding of electrostatics in fluidized beds by adopting computational fluid dynamics (CFD), using the Two-Fluid-Model in MFIX (an open-source code originated by the U.S. Department of Energy). The Maxwell equations were incorporated in the MFIX code. The resulting model is then used to investigate how electrostatics modify bubble shape, size, velocity and interaction for three cases: (a) single bubbles, (b) bubble pairs in vertical and horizontal alignment, and (c) a freely-bubbling bed. In each of these cases, a two-dimensional column, partially filled with mono-sized particles, is simulated for both uncharged and charged particles. In case (a), it is predicted that single bubbles elongate and rise more quickly in charged particles than in uncharged ones. For case (b), electrostatics cause asymmetry of coalescence for a pair of vertically-aligned bubbles, while leading to the migration of a side bubble towards the axis of the column and changing the leading-trailing role for a pair of horizontally-aligned bubbles. Finally in case (c), the simulation predicts that electrostatics decrease bubble size and frequency in the free bubbling regime, accompanied by a change in the spatial distribution of bubbles, causing them to rise more towards the axis of the column. An attempt was also made to test experimentally the single bubble simulations. To reach this goal, a two-dimensional fluidization column was built with a central jet to inject single bubbles. The setup is equipped with a novel Faraday-cup device to measure the charge density accurately. The experimental results indicates a small decrease in bubble size and an increase in bubble height-to-width ratio with increasing charge density, accompanied by an increase in particles raining from the bubble roof. The assumption of uniform charge density on the particles is identified as a significant reason for differences between observed and predicted behaviour.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2013

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Jalalinejad, Farzaneh

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivs 2.5 Canada
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/45136

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Jalalinejad, Farzaneh. Electro-hydrodynamics of gas-solid fluidized beds. doctoral thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/45136