Back to search

University of British Columbia

Micro-PIV measurement of flow through forming fabrics

Abstract

dc:description

This thesis describes an experimental investigation of the flow field upstream of forming fabrics that are typically used in the paper making process. Micro Particle Image Velocimetry was used to measure the velocity distribution upstream of a forming fabric. The velocity upstream of two different types of forming fabrics, namely Monoflex D60TM and IntegraTM, was studied. As expected, the experiments show the existence of a highly variable drainage velocity field upstream of both fabrics. The drainage velocity over the holes can be several times greater than the drainage velocity above the fabric filaments. Since fines and filler tend to follow fluid streamlines, one would therefore expect substantially higher fines and filler concentrations in the holes between the filaments as compared over fabric knuckles. The decay in drainage velocity variations can be represented by the equation Aexp(-Bz/D)+C, where A and B are constant and C is the uncertainty in the experimental setup. D and z represent the fabric’s filament diameter and distance above the fabric surface. It is expected that the response of pulp fibers to the velocity variations caused by the fabric’s weave structure is strongly correlated to their length. The fibers with a length greater than 1.5 mm experience a weighted-average velocity field along their length that is approximately uniform. The deposition of short fibers with length <1500 μm is strongly influenced by the fabric’s weave structure. The experiments also indicate that for fines and filler materials, the different filament diameters and weave patterns among the fabrics are irrelevant since their length scale is smaller than the gap between the fabric filaments. In general, the fabric with finer weave pattern results in more uniform fiber deposition. To study the fiber mat formation, thin layers of fibers were deposited onto the fabric. It was observed that as the grammage increases from 1 g/m² to 5 g/m², the normalized standard variations in drainage velocity field increases from 15% to 61%. The thickness of the boundary region (i.e. the upstream region affected by the disturbance generated by the fabric and fibers) also increases from 1.5D to 3.0D.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2013

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Singh, Fatehjit

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/45656

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Singh, Fatehjit. Micro-PIV measurement of flow through forming fabrics. master's thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/45656