Back to search

University of British Columbia

Bio-oil upgrading through biodiesel emulsification and catalytic vapour cracking

Abstract

dc:description

With our limited fuel supplies struggling to keep up with our ever-increasing demand for energy, and the rising trend towards sustainable and cleaner technologies, the need to harness the potential of bio-oil as an alternative source of energy has never been more compelling. Although crude bio-oil can already be utilized to supplement heating oils and boiler fuels, its greater value lies in its potential as a source of transportation fuels and chemicals after upgrading. In collaboration with Diacarbon Energy Inc., the main objectives of this project were twofold: (1) investigating the effect of extraction location from their proprietary pyrolysis unit on crude bio-oil quality prior to its emulsification with biodiesel, and characterizing the resulting biodiesel- and lignin-rich layers; and (2) designing and building a catalytic test unit to perform in situ cracking of slow pyrolysis vapours. Experimental results confirmed that extraction location does affect the crude bio-oil quality. The effect of the surfactant on the emulsification was minimal as the resulting biodiesel-rich layer from the emulsification without the surfactant showed similar improvements in terms of water content, viscosity, TAN and HHV. A water mass balance confirmed that the majority of the water (~97%) is retained in the lignin-rich phase after emulsification. This is significant because the solvency of biodiesel can be utilized to upgrade bio-oils by selectively extracting its desirable fuel components into a biodiesel-rich phase, which can then be easily separated from the lignin- rich phase where the higher molecular weight compounds, such as pyrolytic lignin, as well as the majority of the water, are retained. The bio-oil samples obtained from the non-catalytic and catalytic vapour cracking experiments separated into two distinct layers – an aqueous and organic layer. While the aqueous layers were fairly similar in nature, the organic layer from the catalytic experiment showed a significant decrease in viscosity (94.3% less) and water content (64.3% less). The organic layer from the catalytic pyrolysis remained homogeneous while that from the non-catalytic pyrolysis split into a hazy aqueous layer (with suspended oil droplets) sandwiched between a thin organic layer on top and a thicker organic layer at the bottom.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2014

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Yu, Joyleene Ruth

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivs 2.5 Canada
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/46841

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Yu, Joyleene Ruth. Bio-oil upgrading through biodiesel emulsification and catalytic vapour cracking. master's thesis, University of British Columbia, 2014. http://hdl.handle.net/2429/46841