Back to search

University of British Columbia

The effects of turbulent drag reducing additives on hydrocyclone operation : an evaluation of the flow behaviour and particle mechanics

Abstract

dc:description

The effects of adding drag reducing additives to a pulp processing hydrocyclone were experimentally investigated. This work was found to contribute towards improving particle separation efficiencies and reducing energy consumption. To effectively evaluate the performance improvements, the flow field was initially measured using laser Doppler velocimetry. In the presence of a particulate phase, the motions of variously sized particles were measured using a three dimensional, dual camera set-up. Quantification of the drag reducing potential of the various polymer solutions and fibre suspensions studied was experimentally determined using an integral analysis for a fixed control volume. The addition of drag reducing polymer additives was found to fundamentally change the hydrocyclone flow field from what is classically observed with water alone. For the conditions studied in this work, the effectiveness of a hydrocyclone towards removing contaminants would likely be reduced, as a particles separation zone was limited. The addition of polymer additives to a hydrocyclone was found to increase the size of particles susceptible to overflow removal. It was found that particles of density 1280 kg/m³ and diameter 500 - 600 microns displayed inwards motion in a 0.03% APAM solution, where purely outwards motion was measured for identically sized particles suspended in water. The flow field, however, indicated that overflow removal is limited to only a small region near the vortex finder. Polymer additives were found to be effective in reducing energy consumption in a hydrocyclone. Maximum drag reduction was found to occur at a reject ratio of 50% for polymer solutions, independent of inlet velocity. The energy savings potential for polymer additives in a pulp processing hydrocyclone, however, was found to be limited to the inlet velocity. Most in process hydrocyclones operate well above the minimum inlet velocities measured for rejects ratios of 25% and 50%, suggesting that additional energy savings would likely occur. The phenomenological degradation of the polymer agents investigated in this work suggests that the practical use of these additives would be difficult. This was found to be most significant with cellulose fibre suspensions containing cationic polyacrylamide (CPAM), as polymer adsorption resulted in rapid polymer degradation.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2014

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • MacKenzie, Jordan Alexander

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivs 2.5 Canada
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/49954

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

MacKenzie, Jordan Alexander. The effects of turbulent drag reducing additives on hydrocyclone operation : an evaluation of the flow behaviour and particle mechanics. doctoral thesis, University of British Columbia, 2014. http://hdl.handle.net/2429/49954