Back to search

University of British Columbia

A sliding wear model and its application to heat exchanger tube wear

Abstract

dc:description

The objective of this study is to quantitatively determine wear and its main parameter relationships for heat exchanger tube wear. A model has been proposed. The literature of the current state of heat exchanger tube wear study, wear mechanisms, and wear models were reviewed. Tube/disc sliding wear tests were conducted with an impact-fretting testing rig incorporated with an advanced control system and an accurate data acquisition system. These ensured that the test results are reliable. The relationships between wear and normal load, wear and sliding distance, wear and frictional work were determined. Advanced surface analysis techniques were used to better understand the heat exchanger tube wear problem. It was found that the roughness and its standard deviation of the tube and the disc were much the same after wear, but surface roughness was neither directly related to the sliding distance nor to the normal load. Plastic deformation was observed. Oxidation became an important mechanism for carbon steel disc/Incoloy tube combination even at room temperature. Based on the experimental results obtained, it was found that the dynamic model by Lin and Cheng was quite suitable for the heat exchanger tube wear. The calculated results satisfactorily matched the test results. This model has been extented to calculate tube wear depth.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1994

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Chen, JingPing

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/5041

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Chen, JingPing. A sliding wear model and its application to heat exchanger tube wear. master's thesis, University of British Columbia, 1994. http://hdl.handle.net/2429/5041