Back to search

University of British Columbia

A VLSI receiver architecture for high speed ATM computer networks

Abstract

dc:description

Network communication bandwidths are surpassing the computational power of host systems. This improvement in communications bandwidth creates a need to develop ded icated communications processors which service the network without serious degradation of throughput. Asynchronous Transfer Mode(ATM) is a new Broadband Integrated Services Digital Network(BISDN) protocol specified to operate over fibre lines at rates of 155 Mbps or 622 Mbps. As the high-speed ATM networking protocol gains widespread acceptance in the networking community, dedicated high-speed protocol processing hardware is required to process ATM’s small 53 byte cells. In ATM networks, the problem of reassembly of cells at network speeds on the receiver side, is of particular significance. The Adaptation Layer is responsible for cell reassembly. In this thesis, a VLSI architecture for ATM receiver adap tation layer processing is presented. A fine grained parallel architecture is employed in our receiver design. Improvements over other ATM receiver designs have been made in our de sign. Potential bottlenecks in existing designs have been identified and an effort is made to overcome these problems. Problems such as parallel CRC computation, fast Virtual Circuit Identifier (VCI) mapping, and effective memory architectures are resolved. The proposed design is shown to operate at high throughputs ranging from 264.46 Mbps to well over 622 Mbps for sustained network data. The design is modelled at two levels so that low level timing details can be determined and high level traffic behavior can be monitored.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Electrical and Computer Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1994

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Chow, Jeffrey

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/5199

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Chow, Jeffrey. A VLSI receiver architecture for high speed ATM computer networks. master's thesis, University of British Columbia, 1994. http://hdl.handle.net/2429/5199