Back to search

University of British Columbia

A real-time fine particulate matter monitor based on inertial size-separation and optical detection in a microchannel

Abstract

dc:description

Exposure to fine particulate matter smaller than 2.5 μm in diameter (PM 2.5) is linked to increased mortality and morbidity. The real-time monitoring of PM 2.5 has important applications in indoor and outdoor air quality monitoring including occupational environments. However, commercially available real-time instruments are bulky and expensive, not suitable for personal exposure level monitoring. This thesis presents a real-time, miniaturized PM 2.5 monitor which consists of a microfluidic-based particle trapping impactor and a forward light scattering optical detector with a 3D-printed housing. The particle trapping impactor channel includes a 90° turn, where larger particles experience a greater inertial force and enter and become captured in the particle trapping region. The detector, positioned downstream from the separator, illuminates the sized particles with a focused laser beam and detects light scattered by the particles using a photodiode to obtain the particle count. The baseline geometry of the impactor is designed according to conventional impactor design methods and analytical calculations. The geometry is further optimized through an iterative process by simulating the flow velocity and particle behavior in the microchannel to obtain the sorting efficiency. The fabricated impactor channel is tested by transmitting particles from 0.5 to 3 µm through the device and is shown to have a 50% cut-off diameter of around 3 µm. The experimental sorting efficiency curve agrees with simulation-based predictions. The arrangement of the detection system is optimized based on Mie scattering intensity and ray tracing calculations. Inexpensive, commercially available components are selected by modeling the optical power of scattered light on the photodiode surface. The detector is tested in parallel with a commercial instrument and shows good correlation at 1 minute sampling interval for 2 µm particles. The measured pulse peak voltage and pulse width agree with the theoretical calculations. The integrated device requires a 10 minutes sampling time for a statistically significant measurement due to particle loss at the interface between the separator and detector. The experimental results demonstrate the potential of using microfluidics as a platform for a low-cost, real-time portable PM 2.5 sensor.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Yuen, Leon Ching Fung

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivs 2.5 Canada
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/52832

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Yuen, Leon Ching Fung. A real-time fine particulate matter monitor based on inertial size-separation and optical detection in a microchannel. master's thesis, University of British Columbia, 2015. http://hdl.handle.net/2429/52832