Back to search

University of British Columbia

Melt fracture behaviour of molten polypropylenes

Abstract

dc:description

Experiments were carried out in both sliding plate and capillary I rheometers with two polypropylene resins to determine the conditions for the onset of slip, surface and gross melt fracture. It was found that there was no distinction between surface and gross melt fracture, which is commonly observed in the case of polyethylenes. Furthermore, the flow curves determined by using capillaries having various diameters are diameter independent, implying the absence of slip. However, performing experiments with slit dies having rough surfaces suggested the presence of wall slip. Further analysis has shown that the effect of viscous heating masks the detection of slip from the diameter dependency of the flow curves. The effect of presence of a thin layer of fluoropolymer (Teflon® PA and Viton®, DuPont) on the critical shear stress for the onset of wall slip and melt fracture as well as on the relationship between the wall slip and the shear stress were also examined. It was found that the presence of such layers increases the slip velocity while decreases the critical shear stress for the onset of slip. Surprisingly, this reduction in the wall shear stress had no effect on the critical shear rate for the onset of melt fracture.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Chemical and Bio-Resource Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1994

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kazatchkov, Igor B.

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/5365

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Kazatchkov, Igor B.. Melt fracture behaviour of molten polypropylenes. master's thesis, University of British Columbia, 1994. http://hdl.handle.net/2429/5365