Back to search

University of British Columbia

Constitutive behaviour of aluminium alloy B206 : in the as-cast and artificially aged states

Abstract

dc:description

The constitutive behaviour of the aluminum foundry alloy B206 has been investigated in both the as-cast and artificially aged states by combining compression, tension, hardness and calorimetry testing. Aluminum alloy B206 is a recently-developed high-strength foundry alloy that has strong potential for use in automotive, aerospace and energy applications. The results of the compression tests, performed on as-cast material and conducted on a Gleeble 3500 thermo-mechanical simulator over a broad range of temperature (50-530⁰C) and strain rates (10-³ ₋ 1s-¹), were used to develop an inclusive constitutive plastic flow behaviour model. A new unified constitutive model was introduced that combines a Ludwik model for flow stress description at low temperatures (50-300⁰C) with a Zener-Hollomon model at high temperatures (300-530⁰C) while accounting for the strain rate dependency of the transition between these two models. The results of the tensile tests, performed on the artificially aged material (ageing performed over a temperature range of 150-250⁰C and a heating duration range of 1-24h), were combined with the calorimetry experiments to develop a model that predicts yield strength. To fit the experimental data into a linear-fit type model that states the yield strength as a linear summation of the effective parameters, temperature and time dependency were introduced through a microstructural variable, precipitation fraction. The precipitation kinetics of B206 were described by an Avrami model that utilized the experimental data acquired from non-isothermal calorimetry followed by an analysis based on the Kissinger method. The remaining material constants in the linear-fit model were found by fitting the model against the tensile test results explaining the yield strength evolution up to the peak-aged state. The model predictions were then qualitatively compared to the results of the hardness measurements, restating the fast precipitation kinetics of B206 at the temperature range used during artificial aging and predicted by the Avrami model. Together, the developed models of B206 in the as-cast and artificially aged states can be used as part of a Through-Process model to optimize the performance of castings made from this alloy.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mohseni, Seyyed Mohammad

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivs 2.5 Canada
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/54534

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Mohseni, Seyyed Mohammad. Constitutive behaviour of aluminium alloy B206 : in the as-cast and artificially aged states. master's thesis, University of British Columbia, 2015. http://hdl.handle.net/2429/54534