Back to search

University of British Columbia

Development of FRP based composite fibre for fibre reinforced cementitious composites

Abstract

dc:description

This thesis describes a method of development of a novel fibre based on fibre reinforced polymers (FRP), for use fibre reinforcement in concrete. Thermosetting epoxy resin matrix were reinforced with E-glass, S-glass, and Carbon fibre to produce different types of composite fibres. The FRP panels were produced using the Vacuum Infusion technique, and then cut to different fibre sizes. The volume fractions of reinforcements within the FRP fibre were controlled by using woven and unidirectional fabrics. The number of layers of reinforcing fibres were also changed, to obtain the optimal thickness of the fibres. The FRP material was characterized by means of tensile tests and microscope image analysis. Four different compositions of FRP were produced with tensile strengths ranging from 195 MPa to 950 MPa. The different combinations in geometry broadened the total number of fibres investigated to 12. Single fibre pullout tests were performed to obtain the fundamental fibre-matrix interfacial bond parameters for the different FRP fibres. The FRP fibres, being hydrophilic, along with having a unique rough surface texture, showed a good bond with cement matrix. A bond strength superior to industrially available straight steel fibres and crimped polypropylene fibres has been observed. The 3 best fibres were then chosen to examine the flexural behaviour FRP fibre reinforced concrete beams. The optimized FRP fibres, one each of Glass FRP and Carbon FRP were then further investigated to study the effect of matrix maturity, temperature, fibre inclination, and loading rate on the fibre-matrix interfacial behaviour using single fibre pullout tests. Scanning Electron Microscope (SEM) analysis was carried out to identify the effect of above-mentioned factors on the surface characteristics of the fibre. An attempt was also made to optimize the fibre-matrix interface to achieve an optimized failure mechanism by coating the fibre with oil. The ability of the fibre to transfer stresses across a cracked section over extended periods has been investigated by means of fibre-relaxation tests. Finally, to assess durability, the fibres were conditioned at high pH and high temperature after which single fibre pullout, direct tension tests, & SEM analysis were conducted.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Farooq, Mohammed

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/57668

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Farooq, Mohammed. Development of FRP based composite fibre for fibre reinforced cementitious composites. master's thesis, University of British Columbia, 2016. http://hdl.handle.net/2429/57668