Back to search

University of British Columbia

Numerical study of pin-supported cross-laminated timber (CLT) shear wall system equipped with low-yield steel dampers

Abstract

dc:description

This thesis presents a numerical study of a novel rocking cross-laminated timber (CLT) shear wall system for low- to mid-rise constructions. The system takes advantage of the high in-plane stiffness of CLT coupled with low-yield steel dampers to control the rocking motion of the CLT shear walls during earthquakes. The low-yield steel dampers connected between two rigid CLT wall panels provide the mechanism needed to dissipate the earthquake energy. This concentrates the damage in the dampers, allowing the system to be repaired efficiently after major earthquakes. Numerical models of the CLT shear wall system have been developed using both OpenSees Navigator and ABAQUS software. Models of low-yield steel damper systems were calibrated using available experimental results. With the rigid floor/roof assumption, a simplified OpenSees model of the CLT shear wall system was demonstrated to be effective and reasonably accurate in predicting the response of the system under large excitations. Therefore, it is efficient and reliable to apply the OpenSees model to study the seismic response of CLT shear wall buildings. A case study of a six-storey CLT shear wall building located in Vancouver, Canada was studied; and, detailed parameteric studies were conducted to investigate the influences of the damper type (damper shear strength), number of dampers, damper location, different earthquake records versus target earthquake design response spectrum, and earthquake peak ground acceleration (PGA) on the building response. It was determined that an optimized damper design with comprehensive consideration of these five factors can provide a building with a small roof drift ratio, as well as minor damages on the dampers. Concepts and examples for connection design are also provided.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Forestry
Grantor dc:publisher
University of British Columbia
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ma, Siyao

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/57747

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Ma, Siyao. Numerical study of pin-supported cross-laminated timber (CLT) shear wall system equipped with low-yield steel dampers. master's thesis, University of British Columbia, 2016. http://hdl.handle.net/2429/57747