University of British Columbia
Anchorage of stirrups in prestressed concrete I-girders
Abstract
dc:descriptionThe current research investigates the performance of commonly-used non-code-compliant stirrup detailing in concrete I-girder bridges, specifically when the lower hooks on the stirrups are oriented parallel to the longitudinal prestressing strands and are not bent around any longitudinal bars. Such detailing does not meet the specifications in the Canadian Highway Bridge Design Code CSA S6-06. An experimental investigation was conducted on full-scale partial sections of a concrete I-girder to evaluate the performance of such non-code-compliant stirrup anchorages by comparing their performance to the performance of code-compliant stirrup anchorages. An analysis of an example concrete I-girder bridge was conducted to determine the demands on the stirrup anchorage during the tests. In the tests, the flexural tension force was applied to the prestressing strand while a diagonal force was applied to the web of the test specimens at approximately 30° to the longitudinal axis of the specimen. Two pairs of stirrups were fixed to a support as the diagonal force was applied. The ratio of the slip of the stirrup to the strain along the exposed length of the stirrup, which equals to the debonded length, was monitored in order to observe the performance of the stirrup anchorage. After applying many cycles of the diagonal force, including about 100 cycles after yielding of the stirrups, the non-code-compliant hooks were found to perform adequately.
Degree
thesis:*- Name thesis:degree_name
- Master of Applied Science - MASc
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Civil Engineering
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Hui, Macarious Kin Fung
Rights
dc:rights- Statement dc:rights
-
- Attribution-NonCommercial-NoDerivatives 4.0 International
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/57783