University of British Columbia
Process-induced shape distortions in aerospace thermoplastic composites
Abstract
dc:descriptionThermoplastic composite materials are of great interest in aerospace structures due to their potential for shorter manufacturing cycle times, high production rates, and their ability to be re-heated and shaped multiple times. Thermoplastic resins offer many new possibilities in their ease of repair, recycling, and welding capabilities. Aerospace-grade thermoplastic composites such as carbon fibre-reinforced polyether-ether-ketone (PEEK) are processed well above their melting point at temperatures as high as 390ºC to allow proper forming and consolidation of the material to take place. During subsequent cool-down from the process temperature, residual stresses develop due to effects of material anisotropy, part geometry, and tool-part interactions that eventually lead to undesired shape distortions in the final part geometry. As observed with thermoset composites, common distortions include spring-in of corner angles and warpage of flat sections. The tight dimensional tolerances required for aerospace parts demand that process-induced shape distortions be well understood in order to eliminate scrap parts and fitting problems during the assembly stage of the components. In this project, L-shape flanges with a corner designed at 90° are manufactured from aerospace-grade AS4/PEEK thermoplastic composite in a hot press using a matched-die tooling configuration. A thermoforming technique is employed that involves heating previously-manufactured flat panels of the material to the processing temperature prior to transfer and consolidation within a relatively cold tool held at constant load and temperature. L-shape flanges consisting of a quasi-isotropic layup of unidirectional plies as well as short randomly-oriented strands of AS4/PEEK are thermoformed at 105°C, 215°C, and 290°C. Spring-in angles of the manufactured parts are quantified using a coordinate measuring machine and the results are compared with predictions from the Nelson-Cairns expression based on material thermal expansion anisotropy. The spring-in angles are also evaluated against measurements of change in part corner angle as a function of temperature due to thermo-elastic effects during heat-up from ambient temperature in a quasi-isotropic and ROS part. The parts are further assessed in terms of thickness measurements, surface quality observations, cross-section optical microscopy, and mechanical strength testing.
Degree
thesis:*- Name thesis:degree_name
- Master of Applied Science - MASc
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Materials Engineering
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Fortin, Gabriel Yves
Rights
dc:rights- Statement dc:rights
-
- Attribution-NonCommercial-NoDerivatives 4.0 International
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/58020