Back to search

University of British Columbia

The physical and chemical characteristics of kimberlite

Abstract

dc:description

A detailed study of the physical and chemical characteristics of kimberlite fines provided the basis for this study which was to determine the factors that govern the flocculation processes. These studies showed that there are many physical and chemical characteristics which are similar and many which differ between the kimberlite samples. The mineralogical study showed that the type of minerals present were the same for each pipe, however their modal distribution varied. This difference is related to the type and intensity of alteration and the subsequent formation of clay-type minerals. The presence or absence of these alteration minerals also accounts for the differences found in the particle size distributions, in the surface areas, in the cation exchange capacities and densities. The zeta potential was found to be similar, with ranges between -15 to -35 mV, between the samples. Tests also showed the zeta potential could be further reduced by the addition of a Mg2 + ion. This reduction in zeta potential did cause some of the pipes to coagulate and settle. Although no one variable could be found, flocculant preference of the individual kimberhte samples appears to be related to the interaction of particle and polymer as a function of solution chemistry. It is postulated that the dissolution of magnesium bearing minerals (olivine) play a significant role. The dissolution of olivine increases the concentration of Mg2 + in solution thus promoting the attraction between particles and between the particle and polymer. In fact, chemical leach tests showed that Mg2 + and Ca 2 + were readily leached into solution, albeit not all pipes leached these ions at the same rate. Values of up to pH 9.5 can be accounted for by the dissolution of olivine. Alkaline pH's >9.5 are assumed to be the result of the formation of calcium hydroxide after the magnesium ion precipitates out of solution as Mg(OH)2. Pipes which produce a very high pH therefore do not have the Mg2 + ion readily available in solution to act as a coagulant. Coincidentally, these pipes required the addition of a coagulant to promote flocculation and a produce a clear supernatant.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mining Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1997

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Howe, Diane Joan

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/5869

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Howe, Diane Joan. The physical and chemical characteristics of kimberlite. master's thesis, University of British Columbia, 1997. http://hdl.handle.net/2429/5869