Back to search

University of British Columbia

Modelling carbon oxidation in pulp mill activated sludge systems : determining model parameters

Abstract

dc:description

To predict the behavior of municipal wastewater treatment facilities, the Activated Sludge Model No. 1 is often used. This model has also served as the basis for the development of many other models to determine the behavior of activated sludge systems treating municipal wastewater, and has also been extended to the development of a model for petrochemical activated sludge treatment systems. Application of the model requires the determination of kinetic parameters and wastewater composition using continuous culture laboratory scale activated sludge reactors. These systems are laborious to operate and are equipment intensive. Activated sludge systems are a commonly used method of secondary treatment of pulp mill effluents in British Columbia. The application of the Activated Sludge Model No. 1 has not been extended previously to predict the performance of carbon oxidation in activated sludge systems treating pulp mill effluent. The objective of this study was to establish a database of experimental information on the characteristics of activated sludge systems treating bleached Kraft pulp mill wastewater using simple on-site batch test methods. Batch test methods involving respirometry and chemical oxygen demand measurements were successful in generating a data set of wastewater and biomass characteristics comparable to those found in the literature. Development of a dynamic mechanistic model based on the data generated in this study will provide a framework for studying the behavior of pulp mill activated sludge systems and provide a basis for planning further experimentation.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1997

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Stanyer, Deborah Jane

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/5896

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Stanyer, Deborah Jane. Modelling carbon oxidation in pulp mill activated sludge systems : determining model parameters. master's thesis, University of British Columbia, 1997. http://hdl.handle.net/2429/5896