Back to search

University of British Columbia

Modeling of agglomerate abrasion in fluidized beds

Abstract

dc:description

Agglomeration occurs in fluidized beds in many industrial processes. It can be a desirable phenomenon, for instance in the pharmaceutical industries, or undesirable, as when it occurs in the Fluid Cokers used in bitumen processing. Excessive agglomerate growth can lead to a reduced efficiency of the process and ultimately to defluidization. Mathematical modeling can provide insights into agglomerate formation and breakage. Modeling the physics of agglomerate breakage is complicated since the breakage model needs to account for a number of processes occurring inside the fluidized bed. Breakage of agglomerates can happen due to fragmentation (high energy based) or abrasion (low energy based), or a combination of both. Abrasion is the process of losing one or a few of the particles from the surface of the agglomerate. It occurs continuously inside the fluidized beds and cannot be neglected for Fluid Cokers. Fragmentation, on the other hand, is the fracture of an agglomerate into pieces due to the breakage of multiple bonds inside it. In this work, a physical model that describes abrasion is derived utilizing the concepts of Kinetic Theory of Granular Flows (KTGF). The model considers the collisions between the different solid phases—particles and agglomerates to obtain the frequency of abrasion and mass transfer between the phases. A Eulerian-Eulerian formulation along with KTGF is used to simulate abrasion of a large agglomerate inside a fluidized bed. All the simulations were performed with commercial CFD code ANSYS Fluent 16, which was augmented by user-defined functions for different experimental conditions and different bed materials using published experimental data. The comparison between the modeling predictions and experimental results demonstrated a good qualitative agreement with some quantitative variations. It was found that the model tends to underestimate the amount of abrasion for capillary dominant system possibly due to neglecting the fragmentation phenomenon in the model. Also the model over predicts abrasion for viscous dominant set up. At the end, a mechanistic approach is suggested for future modeling of agglomerate fragmentation.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Palanisamy, Karthikeyan

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/58970

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Palanisamy, Karthikeyan. Modeling of agglomerate abrasion in fluidized beds. master's thesis, University of British Columbia, 2016. http://hdl.handle.net/2429/58970